Fujimi

Fujimi 422480 Naval Gunfire Support Unit 3rd Squadron [Kongo] [Haruna] Set

Naval Gunfire Support Unit 3rd Squadron [Kongo] [Haruna] Set - Image 1
Merilo: n/a
Proizvajalec: Fujimi
Koda izdelka: fjm422480
Trenutna razpoložljivosti: na voljo!
€39.35 oz. 25700 tč.

Vključno z 22% DDV
pri dostavi v: Slovenija
Za spremembo države kliknite sem

Osnovne informacije

ProizvajalecFujimi
Koda izdelkafjm422480
Merilon/a
Dodano v katalog:20.9.2019
Oznake:Japanese-battleship-Haruna Kongo

Haruna was a Japanese battlecruiser, the keel of which was laid in 1912, launched in December 1913, and commissioned in the Imperial Japanese Navy in April 1915. The total length of the ship was 222 meters, width 31 meters, and a full displacement of 36,000 tons. Harun's top speed was around 30-31 knots. The main armament at the time of the launch was 8 356 mm guns in four turrets, two guns each, and the secondary armament was mainly 14 152 mm guns.

Haruna was the fourth and final Congo-class battleship. In the interwar period, Haruna was intensively modernized, which led to: a significant improvement in the armor of the ship, the reconstruction of the front superstructure, which took the shape of a Japanese pagoda, and an increase in power and modernization of the engine room. Haruna also received catapults enabling the operation of seaplanes. Haruna's combat career in World War II began with her participation in supporting the invasion of British territory in Indochina. In April 1942, the ship also took part in the famous raid of the Japanese fleet to the Indian Ocean, and later - in June this year - took part in the Battle of Midway, where, despite many air attacks, it suffered only minor damage. Haruna also took part in the Battle of the Santa Cruz Islands in October 1942. In 1944, he fought in the Battle of the Philippine Sea in June 1944 and in the Battle of Leyte in October of the same year. In 1945, due to a lack of fuel, Haruna did not take any combat actions, and in July of that year it was severely damaged and later sunk by American on-board planes at the naval base in Kure. The wreckage of the Haruna battlecruiser was scrapped in 1948.

The Congo was a Japanese battlecruiser, the keel of which was laid in 1911, launched in May 1912, and commissioned in the Imperial Japanese Navy in August 1913. The total length of the ship was 222 meters, width 31 meters, and a full displacement of 36,600 tons. The Congo battleship's top speed was around 30 knots. The main armament at the time of the launch was 8 356 mm guns in four turrets, two guns each, and the secondary armament was mainly 8 152 mm guns.

The Congo was the first of the four battlecruisers of the type to bear that name - the Congo. The unit was built at the British Vickers shipyard in Barrows-in-Furness. Thorough modernization of the Congo took place in the period 1929-1931 and 1935-1937, when the ship's engine room was completely changed, the superstructures were expanded, the anti-torpedo cover was improved and the seaplane catapults were added. During World War II, Congo took part in the Battle of Midway (June 1942), but played a marginal role there. In the last months of 1942 he took part in the fighting in the Guadalcanal area, incl. by firing at American positions on the island. In 1944 he fought in the Battle of Leyte, where he was instrumental in sinking the USS Gambler Bay escort carrier. Congo was sunk on November 21, 1944 as a result of a torpedo attack by the American submarine USS Sealion.

Našli ste napako v opisu? Prijavite jo
Mnenja naših strank
Dodajte mnenje o: Naval Gunfire Support Unit 3rd Squadron [Kongo] [Haruna] Set
...
Dodano v katalog: 20.9.2019
Trenutna razpoložljivosti: na voljo!
  • izdelek je na voljo
  • izdelek ni na voljo
  • izdelek je na voljo po naročilu
  • dobava blaga
  • ni na voljo
  • 1 kos
  • 2 kosa
  • 3-5 kosov
  • 6-10 kosov
  • več kot 10 kosov
Ali lahko dobavite izdelek, ki ga ni na spletni strani oziroma se njegov status glasi "ni na voljo"?
Morebitni dodatki

Proizvajalec: Kagero
Koda izdelka: KAG-TD-7110-EN-PL
Razpoložljivost: na voljo!

€19 oz. 10600 tč.

Proizvajalec: Kagero
Koda izdelka: KAG-TD-7021-EN+PL
Razpoložljivost: na voljo!

€19 oz. 10600 tč.

Merilo: n/a
Proizvajalec: Artwox
Koda izdelka: AWX-AW50056
Razpoložljivost: po naročilu

€12.77 oz. 8300 tč.

Merilo: n/a
Proizvajalec: Artwox
Koda izdelka: AWX-AW50059
Razpoložljivost: po naročilu

€12.77 oz. 8300 tč.

Proizvajalec: Kajika Model
Koda izdelka: KAJ-71014
Razpoložljivost: na voljo!

€38.82 oz. 25400 tč.

Proizvajalec: Part
Koda izdelka: PRT-X002
Razpoložljivost: na voljo!

€6.77 oz. 4400 tč.

Proizvajalec: Part
Koda izdelka: PRT-X005
Razpoložljivost: na voljo!

€6.77 oz. 4400 tč.

Proizvajalec: Part
Koda izdelka: PRT-X004
Razpoložljivost: na voljo!

€6.77 oz. 4400 tč.

Proizvajalec: Part
Koda izdelka: PRT-X003
Razpoložljivost: na voljo!

€6.77 oz. 4400 tč.

Proizvajalec: Plastruct
Koda izdelka: PLS90682
Razpoložljivost: na voljo!

€3.13 oz. 2000 tč.

Proizvajalec: Part
Koda izdelka: PRT-X001
Razpoložljivost: na voljo!

€6.77 oz. 4400 tč.

Proizvajalec: Aber
Koda izdelka: abeSV-05
Razpoložljivost: na voljo!

€9.45 oz. 6200 tč.

Sorodni izdelki

Merilo: n/a
Proizvajalec: Fujimi
Koda izdelka: fjm422503
Razpoložljivost: na voljo!

€24.92 oz. 16300 tč.

Merilo: 1:700
Proizvajalec: Hasegawa
Koda izdelka: has43109
Razpoložljivost: na voljo!

€31.85 oz. 20800 tč.

Merilo: 1:700
Proizvajalec: Hasegawa
Koda izdelka: has43111
Razpoložljivost: na voljo!

€32.12 oz. 21000 tč.

Merilo: 1:200
Proizvajalec: Angraf
Koda izdelka: ANG-4-2012
Razpoložljivost: na voljo!

€33.53 oz. 19200 tč.

Merilo: 1:700
Proizvajalec: Kajika Model
Koda izdelka: KAJ-70001U
Razpoložljivost: na voljo!

€85.40 oz. 55800 tč.

Merilo: 1:700
Proizvajalec: Kajika Model
Koda izdelka: KAJ-70003
Razpoložljivost: na voljo!

€49.26 oz. 32200 tč.

Merilo: 1:350
Proizvajalec: Fujimi
Koda izdelka: fjm600550
Razpoložljivost: na voljo!

€287.52 oz. 187900 tč.

Merilo: 1:700
Proizvajalec: Kajika Model
Koda izdelka: KAJ-70001
Razpoložljivost: na voljo!

€54.88 oz. 35900 tč.