Dragon

Dragon 9017 Flammpanzer III

Flammpanzer III - Image 1
Merilo: 1:35
Proizvajalec: Dragon
Koda izdelka: dra9017
Trenutna razpoložljivosti: ni na zalogi
Zadnjič na voljo: 10.6.2011
€26.74 oz. 17500 tč.

Vključno z 22% DDV
pri dostavi v: Slovenija
Za spremembo države kliknite sem

Če izdelka trenutno ni, vtipkajte vaš e-naslov, da prejmete samodejno obvestilo, ko bo izdelek spet na voljo!

Ali lahko dobavite izdelek, ki ga ni na spletni strani oziroma se njegov status glasi "ni na voljo"?

Osnovne informacije

ProizvajalecDragon
Koda izdelkadra9017
Teža:0.58 kg
Merilo1:35
Dodano v katalog:10.11.2005
Oznake:PzKpfw-III

The PzKpfw III (Panzerkampfwagen III) was a German medium tank from the Second World War. The first prototypes of the vehicle were made in 1936, and serial production continued in the period 1937-1943, ending with the production of about 5,800 vehicles. The tank in the E version was powered by a single Maybach HL 120 TRM engine with a capacity of 300 HP. It was armed with one 37mm KwK 35/36 cannon and two 7.92mm MG 34 machine guns. placed in the tower.

PzKpfw III was the "workhorse" of the German armored forces during World War II and one of the most intensively developed and modernized Wehrmacht tanks. Its serial production started in 1936, and many variants of this tank were created in its course. Chronologically, the first version was the A version, armed with a 37mm gun and a 230hp engine. However, already in December 1938, the E version was created, which was the first version produced in large series. It had a new, significantly more powerful engine, a completely new suspension and stronger armor in the front part of the turret and hull. Later (from December 1940) it was also armed with a more powerful 50mm cannon. In March 1940, the G version began to be produced, in which the rear hull and turret armor was reinforced. Soon after, in October 1940, the production of the H version started, which from the very beginning was armed with the 50mm KwK 38 L / 42 gun and had reinforced frontal armor. One of the most produced was the J version, which had armor up to 50 mm thick (later reinforced with aplique plates), and after the experience gained from the clashes with the T-34 and KW-1 vehicles - it was intensively rearmed for the KwK 39 L / 60 cannon. cal. 50 mm. The last development version was the N version, which was to be a support tank for armored grenadiers and was armed with a 75mm KwK 37 L / 24 short-barreled cannon. Numerous other vehicles were built on the chassis of the PzKpfw III, such as the StuG III assault gun. PzKpfw III tanks were used on almost all fronts of World War II - from the September campaign in 1939, through the campaign in France in 1940, operations Barbarossa and Typhoon in 1941, the Battle of Kursk in 1943, to the last operations of the German army against The USSR and the Western Allies in 1944-1945.

Našli ste napako v opisu? Prijavite jo
Mnenja naših strank
Dodajte mnenje o: Flammpanzer III
...
Dodano v katalog: 10.11.2005
Trenutna razpoložljivosti: ni na zalogi
  • izdelek je na voljo
  • izdelek ni na voljo
  • izdelek je na voljo po naročilu
  • dobava blaga
  • ni na voljo
  • 1 kos
  • 2 kosa
  • 3-5 kosov
  • 6-10 kosov
  • več kot 10 kosov
Ali lahko dobavite izdelek, ki ga ni na spletni strani oziroma se njegov status glasi "ni na voljo"?
Morebitni dodatki

Merilo: 1:35
Proizvajalec: DEF Model
Koda izdelka: DEF-DO35030
Razpoložljivost: na voljo!

€18.01 oz. 11800 tč.

Proizvajalec: AMMO of Mig Jimenez
Koda izdelka: AMM-6037
Razpoložljivost: na voljo!

€34.49 oz. 19200 tč.

Merilo: 1:35
Proizvajalec: VoyagerModel.Co.Ltd
Koda izdelka: VOY-PE35158
Razpoložljivost: na voljo!

€36.41 oz. 23800 tč.

Merilo: 1:35
Proizvajalec: Part
Koda izdelka: PRT-P35-129
Razpoložljivost: na voljo!

€12.79 oz. 8400 tč.

-25%

Merilo: 1:35
Proizvajalec: PanzerArt
Koda izdelka: PNZTR35-011
Razpoložljivost: na voljo!

€30.78 €23.07
oz. 20100 tč.

Merilo: 1:35
Proizvajalec: Rye Field Model
Koda izdelka: RFM-RM-5084
Razpoložljivost: na voljo!

€24.76 oz. 16200 tč.

Merilo: 1:35
Proizvajalec: T-Rex Studio
Koda izdelka: TRE-35028
Razpoložljivost: na voljo!

€11.62 oz. 7600 tč.

Merilo: 1:35
Proizvajalec: T-Rex Studio
Koda izdelka: TRE-35103
Razpoložljivost: na voljo!

€12.77 oz. 8300 tč.

Merilo: 1:35
Proizvajalec: Aber
Koda izdelka: abeG05
Razpoložljivost: na voljo!

€7.65 oz. 5000 tč.

Merilo: 1:35
Proizvajalec: Royal Model di R. Reale
Koda izdelka: RLM085
Razpoložljivost: na voljo!

€8.14 oz. 5300 tč.

Merilo: 1:35
Proizvajalec: PanzerArt
Koda izdelka: PNZRE35-704
Razpoložljivost: na voljo!

€21.17 oz. 13800 tč.

Merilo: 1:35
Proizvajalec: Aber
Koda izdelka: abe35L-321
Razpoložljivost: na voljo!

€9.21 oz. 6000 tč.

Sorodni izdelki

Merilo: 1:35
Proizvajalec: Hobby Boss
Koda izdelka: HBB80150
Razpoložljivost: na voljo!

€53 oz. 34600 tč.

Merilo: 1:35
Proizvajalec: Hobby Boss
Koda izdelka: HBB80151
Razpoložljivost: na voljo!

€53 oz. 34600 tč.

Merilo: n/a
Proizvajalec: Meng Model
Koda izdelka: MNG-WWT005
Razpoložljivost: na voljo!

€16.68 oz. 10900 tč.

Merilo: 1:72
Proizvajalec: OKB Grigorov
Koda izdelka: OKB-V72074A
Razpoložljivost: po naročilu

€66.39 oz. 43400 tč.

Merilo: 1:72
Proizvajalec: The Plastic Soldier Company
Koda izdelka: PSC-WW2V20018
Razpoložljivost: 2-6 tednov

€33.73 oz. 22000 tč.

Merilo: 1:35
Proizvajalec: Dragon
Koda izdelka: dra6989
Razpoložljivost: na voljo!

€237.19 oz. 155000 tč.

Merilo: 1:72
Proizvajalec: The Plastic Soldier Company
Koda izdelka: PSC-WW2V20010
Razpoložljivost: 2-6 tednov

€33.73 oz. 22000 tč.

Merilo: 1:35
Proizvajalec: Tamiya
Koda izdelka: tam35215
Razpoložljivost: na voljo!

€32.32 oz. 20100 tč.

Merilo: 1:35
Proizvajalec: Dragon
Koda izdelka: dra6957
Razpoložljivost: na voljo!

€69.33 oz. 45300 tč.

Merilo: 1:72
Proizvajalec: First to Fight
Koda izdelka: FTFPL014
Razpoložljivost: na voljo!

€10.97 oz. 6100 tč.

Merilo: 1:72
Proizvajalec: First to Fight
Koda izdelka: FTFPL073
Razpoložljivost: na voljo!

€10.97 oz. 6100 tč.

Merilo: 1:48
Proizvajalec: Tamiya
Koda izdelka: tam32524
Razpoložljivost: na voljo!

€27.71 oz. 17300 tč.