Heller

Heller 81008 Duquesne

Duquesne - Image 1
Merilo: 1:400
Proizvajalec: Heller
Koda izdelka: hlr81008
Trenutna razpoložljivosti: ni na zalogi
Zadnjič na voljo: 25.3.2019
€16.94 oz. 11100 tč.

Vključno z 22% DDV
pri dostavi v: Slovenija
Za spremembo države kliknite sem

Če izdelka trenutno ni, vtipkajte vaš e-naslov, da prejmete samodejno obvestilo, ko bo izdelek spet na voljo!

Ali lahko dobavite izdelek, ki ga ni na spletni strani oziroma se njegov status glasi "ni na voljo"?

Osnovne informacije

ProizvajalecHeller
Koda izdelkahlr81008
Teža:0.41 kg
Ean:3279510810080
Merilo1:400
Dodano v katalog:30.10.2004
Oznake:Duquesne

The Duquesne (D 603) is a French Suffren-class missile destroyer (in French nomenclature: cruiser and later frigate). The keel for this unit was laid in 1965, it was launched in February 1966, and it was commissioned for service in the French Marine Nationale in 1970. The full displacement of the Suffren class units was 6,900 tons, 157 m long and 15 m wide. The maximum speed was up to 34 knots. The Suffren-class ships were armed at the time of launch with: a single, dual-rail Masurca rocket launcher, a single Malafon missile launcher, 2 single 100 mm cannons, 2 30 mm Hispano-Suiza cannons, and 4 533 mm torpedo tubes.

Duquesne (D 603) was the second and last ship of the Suffren class. Units of this type were built with the intention of using mainly guided missiles and the cover of French airmen Foch and Clemenceau. They were units intended primarily to combat air targets and the activities of ZOP (anti-submarine warfare). The units had very good seagoing ability, and when they entered service - modern and rich armaments and electronic equipment. Duquesne (D 603), after entering service, belonged to the French Atlantic Fleet, and from 1975 it was based in Toulon on the Mediterranean Sea. In the years 1976-1977 and 1984-1985 the unit underwent modernizations, such as adding four single launchers for the MM-38 Exocet missiles. Duquesne was not decommissioned until 2007.

Našli ste napako v opisu? Prijavite jo
Mnenja naših strank
Dodajte mnenje o: Duquesne
...
Dodano v katalog: 30.10.2004
Trenutna razpoložljivosti: ni na zalogi
  • izdelek je na voljo
  • izdelek ni na voljo
  • izdelek je na voljo po naročilu
  • dobava blaga
  • ni na voljo
  • 1 kos
  • 2 kosa
  • 3-5 kosov
  • 6-10 kosov
  • več kot 10 kosov
Ali lahko dobavite izdelek, ki ga ni na spletni strani oziroma se njegov status glasi "ni na voljo"?
Morebitni dodatki

Merilo: 1:400
Proizvajalec: Aber
Koda izdelka: abe1-400-07
Razpoložljivost: na voljo!

€9.45 oz. 6200 tč.

-26%

Proizvajalec: Plastruct
Koda izdelka: PLS90682
Razpoložljivost: na voljo!

€2.73 €2.03
oz. 1800 tč.

-25%

Proizvajalec: Part
Koda izdelka: PRT-X032
Razpoložljivost: na voljo!

€5.27 €3.93
oz. 3400 tč.

-26%

Proizvajalec: Plastruct
Koda izdelka: PLS90692
Razpoložljivost: na voljo!

€2.73 €2.03
oz. 1800 tč.

-25%

Proizvajalec: Part
Koda izdelka: PRT-X034
Razpoložljivost: na voljo!

€5.27 €3.93
oz. 3400 tč.

Proizvajalec: Plastruct
Koda izdelka: PLS90691
Razpoložljivost: na voljo!

€2.35 oz. 1500 tč.

Proizvajalec: Plastruct
Koda izdelka: PLS90681
Razpoložljivost: na voljo!

€2.35 oz. 1500 tč.

Proizvajalec: Part
Koda izdelka: PRT-X008
Razpoložljivost: na voljo!

€6.77 oz. 4400 tč.

Merilo: 1:400
Proizvajalec: Modelik
Koda izdelka: mod_AKC_A45
Razpoložljivost: na voljo!

€3.10 oz. 2000 tč.

Proizvajalec: Part
Koda izdelka: PRT-X002
Razpoložljivost: na voljo!

€6.77 oz. 4400 tč.

Proizvajalec: Plastruct
Koda izdelka: PLS90662
Razpoložljivost: na voljo!

€3.08 oz. 2000 tč.

Merilo: 1:400
Proizvajalec: Modelik
Koda izdelka: mod_AKC_A47
Razpoložljivost: na voljo!

€3.10 oz. 2000 tč.